Use these carbide inserts for general purpose turning.

Heat resistant and shaped for turning stainless steel specifically, these inserts will last longer than inserts for multiple materials.

Heat resistant and wear resistant, these inserts cut super alloys—such as Inconel and Waspaloy—and titanium better than general use inserts.

Secure carbide inserts inside these holders for stable turning.

When it's time to replace the screws in a carbide insert holder, use the reference number on your holder to find the right size.

These tools come with carbide inserts installed. When one edge of the insert dulls, rotate it to use a sharp edge.

Replace Torx keys and screws for boring carbide insert holders with coolant hole.

Deliver coolant through the holder to keep workpieces cool while boring tough materials, such as steel, stainless steel, and nickel-based alloys.

These sets have a variety of indexable boring insert holders with carbide inserts and a wood storage stand. When one edge of a tool's insert dulls, rotate it to use a sharp edge to enlarge existing holes to precise diameters.

Pair these holders with a tool block for right- and left-hand mounting in a lathe.

Cut square corner grooves in a workpiece or cut completely through a part.

Fit these holders directly into a lathe tool post or appropriately sized holder without the need for a tool block.

These inserts can cut grooves on both the outside and inside of a workpiece depending on the holder used.

Replace worn or missing clamps and clamp screws in high-performance carbide insert holders for threading and grooving.

A carbide insert comes installed on these tools.

Contour the interior wall of a hollow workpiece when you pair a holder with a compatible insert.

Pair these carbide inserts with our Replaceable Carbide-Insert End Mills. They have a mounting hole that allows you to fasten them directly to the end mill body for a hold that's strong enough to handle the high speeds of a CNC machine.

These kits include a cutter body, inserts, wrenches, and screws, so you can create your own face milling cutters, which are also known as indexable face milling cutters.

Use these bits to drill a large number of holes with high precision. When the cutting edges dull, replace the carbide inserts (sold separately) instead of the entire bit.

The 60° countersink angle is compatible with the profile of centers on a lathe.