About Masonry Drill Bits
More
About Drill Bits
More
About Countersinks
Countersinks cut a cone-shaped opening to install screws and rivets flush with a surface or hold workpieces between centers on a lathe. They can also be used for chamfering and deburring.
More
Drill Bit Decimal Size Equivalents
More
Round-Shank Masonry Drill Bit Sets for Rotary Hammers
Use with handheld power drills, drill presses, and in hammer drills. Drill holes using simultaneous rotary and hammering action to break masonry material into tiny granules. These bits drill faster and penetrate material with less pressure than rotary-only bits. Also called percussion or impact bits.
For technical drawings and 3-D models, click on a part number.
Number of Pieces | Drill Bit Sizes Included | Point Style | Specifications Met | For Use On | Each | |
Inch | ||||||
---|---|---|---|---|---|---|
Uncoated Carbide-Tipped Steel | ||||||
4 | 1/4"; 5/16"; 3/8"; 1/2" | Standard | ANSI B212.15 | Masonry, Concrete | 000000 | 000000 |
Chip-Clearing Round-Shank Masonry Drill Bit Sets for Rotary Hammers
A more controlled chip removal reduces heat buildup, making these bits good for use on brittle material such as block and brick. Drill holes using simultaneous rotary and hammering action to break masonry material into tiny granules. This type of bit drills faster and penetrates material with less pressure than rotary-only bits. Also called percussion or impact bits.
For technical drawings and 3-D models, click on a part number.
Number of Pieces | Drill Bit Sizes Included | Point Style | Specifications Met | For Use On | Each | |
Inch | ||||||
---|---|---|---|---|---|---|
Uncoated Carbide-Tipped Steel | ||||||
4 | 1/4"; 5/16"; 3/8"; 1/2" | Standard | ANSI B212.15 | Masonry, Concrete | 000000 | 000000 |
Multidiameter Drill Bit Sets
Steps with progressively larger diameters let you drill a range of sizes with one bit. Also known as step drills.
For technical drawings and 3-D models, click on a part number.
Number of Pieces | Drill Bit Sizes Included | Shank Type | Point Style | For Use On | Each | |
Inch | ||||||
---|---|---|---|---|---|---|
Uncoated High-Speed Steel | ||||||
4 | 1 each in sizes 1/8"-1/2", 3/16"-1/2", 3/16"-7/8", 13/16"-1 3/8" | Hex | Standard | Steel, Iron, Aluminum, Brass, Bronze, Plastic | 0000000 | 0000000 |
Finger Drill Bit Sets
An alternative to a pin vise and separate drill bits, each of these bits has its own handle, making it easier to switch between bits of different sizes.
For technical drawings and 3-D models, click on a part number.
Number of Pieces | Drill Bit Sizes Included | Point Style | For Use On | Each | |
Wire Gauge | |||||
---|---|---|---|---|---|
Uncoated High-Speed Steel | |||||
4 | 80 ga; 78 ga; 76 ga; 74 ga | Standard | Plastic, Wood | 0000000 | 000000 |
4 | 72 ga; 70 ga; 68 ga; 66 ga | Standard | Plastic, Wood | 0000000 | 00000 |
4 | 64 ga; 62 ga; 60 ga; 58 ga | Standard | Plastic, Wood | 0000000 | 00000 |
4 | 56 ga; 54 ga; 52 ga; 50 ga | Standard | Plastic, Wood | 0000000 | 00000 |
Depth-Limiting Drill Bit Stop Collar Sets
Ensure identical hole depths every time. Position the collar on your bit and tighten the set screw.
For technical drawings and 3-D models, click on a part number.
No. of Pieces | For Drill Bit Size | Hex Key Size for Set Screw | Material | Each | |
4 | 5/8", 3/4", 7/8", 1" | 5/32" | Steel | 0000000 | 000000 |
High-Speed Steel Countersink Sets for Screws
Choose fewer flutes for a faster cut or more flutes for a smoother finish. An 82° countersink angle is compatible with the profile of flat- and oval-head inch screws; a 90° countersink angle is compatible with the profile of flat- and oval-head metric screws and is also good for deburring.
TiN (titanium nitride) coated countersinks last longer and withstand more heat than black-oxide coated or uncoated countersinks.
For technical drawings and 3-D models, click on a part number.
Number of Flutes | Body Dia. Included | Number of Pieces | Number of Countersinking Ends | Shank Type | For Use On | Container Type | Set | |
82° Countersink Angle | ||||||||
---|---|---|---|---|---|---|---|---|
Titanium Nitride (TiN) Coated High-Speed Steel | ||||||||
1 | 1/4", 1/2", 3/4", 1" | 4 | 1 | Round | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Plastic Case | 00000000 | 0000000 |
6 | 1/4", 1/2", 3/4", 1" | 4 | 1 | Round | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Plastic Case | 00000000 | 000000 |
90° Countersink Angle | ||||||||
Titanium Nitride (TiN) Coated High-Speed Steel | ||||||||
1 | 1/4", 1/2", 3/4", 1" | 4 | 1 | Round | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Plastic Case | 00000000 | 000000 |
6 | 1/4", 1/2", 3/4", 1" | 4 | 1 | Round | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Plastic Case | 00000000 | 000000 |
Combination Extractor/Drill Bit Sets
Drill and remove broken screws, bolts, and studs with a single tool. After drilling, insert the extractor and turn. The part will back out without damaging the threads around it.
For Screw | ||||||||
---|---|---|---|---|---|---|---|---|
No. of Extractors Included | Thread Dia. | Size | Overall Lg. | Shank Dia. | Turns With | Material | Each | |
For Right-Hand Threads | ||||||||
4 | 0.12"-0.39" | No. 4-3/8" (M5-M10) | 2" | 0.248"-0.342" | Power Drill | Steel | 000000 | 000000 |