Filter by
Thread Type
DFARS Compliance
Plasma Cutters for Metals
Using compressed air and electricity, these cutters make accurate cuts in conductive materials such as steel, stainless steel, aluminum, brass, and copper. They include a torch that is easier to maneuver and control than a portable saw, so it allows you to make straight and contoured cuts in tight spaces. Use cutters intermittently when cutting materials of the maximum thickness.
Cutter for 1/4" thick steel is wired for 240 volts and includes an adapter cord for 110 volts. Motor is single phase.
Cutter for 5/8" thick steel is wired for 208 and 230 volts, single phase. It can be wired for 3 phase.
Plasma Cutters
A
B
| For Recommended Steel Thickness | Cutting Time On/Off, min. | Voltage, V AC | Ht. | Wd. | Dp. | Cutting Cable Lg., ft. | Weight, lbs. | Includes | Each | ||
Cutting Pattern—Straight, Right Curves, Left Curves | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
For Use On Steel, Iron, Stainless Steel, Nickel, Aluminum, Brass, Copper | |||||||||||
| A | 1/4" @ 110 V AC, 1/4" @ 240 V AC | 6/10 | 110/240 | 12.6" | 7.9" | 18 1/8" | 16 | 22 | Torch, Ground Cable and Clamp, Input Power Adapters, Spare Parts Kit | 00000000 | 000000000 |
| B | 5/8" @ 208 V AC, 5/8" @ 230 V AC | 6/10 | 208/230 | 15" | 12" | 24" | 20 | 43 | Torch, Ground Cable and Clamp, Spare Parts Kit | 00000000 | 00000000 |
Replacement Parts for Style A
Gas Distributor/Start Cartridge
Shield Cup
Cutting Tip
Electrode